John Deere Z930R

Double tap to zoom

ZTrak Z900 R Series Z930R

ZTrak Z930R

The Z900 R Series was created for contractors who demand the best and want the ultimate in features. That’s why we put in our Comfort and Convenience controls, the Hydraulic Cross-Porting System, the Brake-N-Go foot pedal start, and a 3-year, 1500 hour warranty.

7-Iron™ PRO and Mulch On Demand™ Mower... + Read More

  • Get a Quote

    Get A Quote

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

  • Contact an Expert

    Contact an Expert

    Fields with asterisks* are required. Your expert will receive an email that contains a reference to this page.

Share This Product:

 

Features

  • Mower is easy to service with many accessible components
  • Field-installed propane conversion kits for Commercial Walk-Behind Mowers, QuikTrak™ Mowers, and Commercial ZTrak™ Mowers
  • Powerful 25.5-hp (19.0-kW) commercial-grade engine delivers class-leading performance and efficiency
  • Durable 7Iron™ PRO decks pressed from a single piece of steel
  • Available Mulch On Demand™ (MOD) deck
  • Three seat choices offer exceptional operator comfort
  • Michelin® X® Tweel® Turf airless radial tire technology for ZTrak™ Mowers eliminates downtime and reduces cost of operation
  • Spindle assembly provides greater performance and reliability
  • Standard comfort and convenience allows for easy deck height adjustment and power take-off (PTO) shutoff
  • Three-year, bumper-to-bumper warranty

Specs

   John Deere Z930R ZTrak™ Zero-Turn Mower 
ENGINE
Manufacturer  
Model no. FX801V
Horsepower (gross) At 3,600 rpm, 25.5 rpm
19 kW
Displacement 52 cu in.
852 cc
Cylinders Two
Crankcase capacity With filter, 2 U.S. qt
1.9 L
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Air
Air cleaner Pre-cleaner
Yes
Heavy-duty canister type with safety element
FUEL SYSTEM
Fuel type Gasoline
Fuel consumption Under normal conditions, load, operation, and dependent on loads and operating conditions 1.1-1.9 U.S. gal./hr
4.2-7.2 L/hr
Fuel tank capacity 11.5 U.S. gal.
43.5 L
Fuel tank switch/shut-off valve Yes
ELECTRICAL SYSTEM
Charge system 20 amp
Battery voltage 12 V
Cold cranking amp 300 amp
Hour meter Standard, digital
Operator presence starting system Brake-N-Go (foot)
DRIVETRAIN
Wheel motors Tuff Torq heavy-duty integrated piston wheel motor
Travel speed Forward
0-12 mph
0-19.3 km/hReverse
0-4.5 mph
0-7.2 km/h
Speed and direction control Twin levers
Hydraulic capacity 5.9 U.S. qt
5.6 L
Hydraulic oil cooler  
Filter Internal, replaceable
Hydraulic pumps  
TIRES
Drive tires 24x12-12
Rear tires  
Load rating 4 PR
BRAKES
Dynamic braking Twin levers
Park brake Internal wet disk integrated in the transmission
Park brake actuation Foot brake
PTO
Type Electro-magnetic, 225 lb-ft
305 Nm
Drive V-belt
MOWER DECKS
Available widths 54, 60 in.
137, 152 cm
Deck construction 7-Iron PRO, one-piece stamped steel with reinforcements
Deck thickness 7 gauge
0.18 in.
4.6 mm
Discharge Side, MOD
Height-of-cut range Increments
0.25 in.
0.64 cm
1-5.5 in.
2.54-14 cm
Cutting width 54, 60 in.
137, 152 cm
BLADES
Length Varies by deck size
Thickness 0.25 in.
0.64 cm
Tip speed Approximately 18,000 fpm
5,486 m/min
Number Three
WHEELS
Caster wheel type Flat free
Caster wheel size 13x6.5-6
Front anti-scalp rollers RH, center, LH
Rear anti-scalp rollers Optional
DIMENSIONS
Length 84 in.
213 cm
Width With chute down, 68, 74 in.
173, 188 cm
Height With ROPS up, 73 in.
185 cm
With ROPS down, 47 in.
119 cm
Weight 1,273 to 1,310 lb
577 to 594 kg
ADDITIONAL INFORMATION
Date collected 24-Apr-2017