
Features
- Yanmar Diesel Engine
- Hydrostatic Transmission
- Standard 4-wheel drive
- Independent PTO
Specifications
Manufacturer | John Deere |
Model | 4105 (2017) |
Engine | |
Family | CYDXL1.50K3T or DYDXL1.50L3T or EYDXL1.50L3T or FYDXL1.50L3T |
Manufacturer | Yanmar |
Engine model | --- |
Engine power (gross) | 30.2 kW |
41 hp | |
97/68/EC rated power | |
Power take-off (PTO) power | 24.2 kW |
32.5 hp | |
Rated engine speed | 2800 rpm |
Type | Diesel |
Injection pump type | In-line with electric shutoff |
Aspiration | Turbocharged |
Emissions compliance | Tier 4 Interim or Final Tier 4 |
Cylinders/displacement | 3 / 1.496 L |
3 / 91.3 cu in. | |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Bore and stroke | 84 x 90 mm |
3.3 x 3.54 in. | |
Compression ratio | 19.0:1 |
Lubrication | Pressurized |
Cooling system | Water pump |
Air cleaner | Dual element with electronic restriction indicator |
Engine torque at rated speed | 80.3 Nm |
59.2 lb-ft | |
Fuel tank capacity | 39.7 L |
10.5 U.S. gal. | |
Electrical | |
Battery size | 500 CCA |
Alternator (12-V) | 40 amp |
Starter size | 1.4 kW |
1.9 hp | |
Fuel system | |
Type | Direct injection |
Fuel consumption | 8.9 L/hr |
2.35 U.S. gal./hr | |
*Fuel consumption rate should be used for comparison purposes only | --- |
Transmission | |
Standard transmission; forward/reverse | Hydro, 2-Range |
Optional transmission; forward/reverse | --- |
Left-hand reverser | No |
Transmission gear ranges | --- |
Final drive | Planetary |
Brakes | Wet disk |
Steering | Power steering |
Clutch, wet/dry | --- |
Clutch disk diameter wet clutch | --- |
Axle capacity | --- |
Front | 720-1450 kg |
1587-3197 lb | |
Rear | 1815 kg |
4000 lb | |
Creeper | No |
Cruise control | Optional |
Differential lock | Yes |
Drawbar maximum vertical load | |
Hydraulics | |
Type | Open Center |
Pump rated output | 56.2 L/min |
14.8 gpm | |
Steering | 21.6 L/min |
5.7 gpm | |
Implement | 34.7 L/min |
9.2 gpm | |
Pump type | Dual gear |
Maximum operating pressure | 2500 psi |
Draft control sensing | Position control |
Remote control valves available | 2 |
3-point hitch | |
Category | Category 1 |
Lift capacity, 24-in. behind link arms | 999 kg |
2200 lb | |
Power take-off (PTO) | |
Standard | Rear @ 540 rpm |
Optional | --- |
Control | Independent |
Clutch | Wet disk |
Brake (for mid and rear PTO) | N/A |
Engagement method | --- |
Fluid capacities | |
Crankcase with filter | 4.3 L |
4.5 qt | |
Transmission and hydraulic system | 25.7 L |
6.8 U.S. gal. | |
Final drive | |
Type | Planetary |
Differential lock | Yes |
Operator station | |
Rollover protective structure | ASAE S478 |
Type | Rigid |
Platform - flat/straddle | Semi-flat |
Gear shift location - console/floor | Left Side |
Cab | |
Compliance | --- |
Visibility | --- |
Air conditioning, temperature differential | --- |
Doors | --- |
Noise rating | --- |
Seat equipment | --- |
Dimensions | |
Wheelbase | 1727 mm |
68 in. | |
Front axle clearance | 373 mm |
14.7 in. | |
Turning radius with brakes | --- |
Turning radius without brakes | 2.89 m |
9.5 ft | |
Limited slip differential | --- |
Approximate shipping weight (open-station; cab) | 1355 kg |
2987 lb | |
Tires | |
Front | 10-16.5 R4 / 8-16 R1 - MFWD |
Rear | 17.5L-24 R4 / 14.9-24 R1 - MFWD |
Front tread range | --- |
Rear tread spacing | --- |
Miscellaneous | |
Toolbox | --- |
Tilt steering wheel | --- |
12-V Outlet | --- |
Date collected | --- |
APPLY FOR FINANCING TODAY!
-
Bay City
1402 FM 3156
Bay City, TX 77414
979-245-2711
Map & Hours -
Beaumont
9135 College St.
Beaumont, TX 77707
409-842-1128
Map & Hours -
East Bernard
628 S. Dill
East Bernard, TX 77435
979-335-4887
Map & Hours -
El Campo
1010 Highway 59 West
El Campo, TX 77437
979-543-8363
Map & Hours -
Liberty
2210 Hwy 90 East
Liberty, TX 77575
936-336-7226
Map & Hours -
Victoria
9806 US Hwy 59
Victoria, TX 77905
361-578-7072
Map & Hours -
Shiner
1012 Hwy 95 North
Shiner, TX 77984
361-594-3312
Map & Hours -
Giddings
1309 E. Austin P.O Box 36
Giddings, TX 78942
979-542-2259
Map & Hours