John Deere DN456 New Leader Dry Spinner Spreader

Model Photo

 

Features

Wide spread widths are available with the DN456

#

Spread width up to 32 m (105 ft) can be achieved with the DN456.

The DN456 provides up to 32-m (105-ft) spread widths and the adjustable spinner assembly allows for quick, accurate settings during variable-rate applications, broadcasting materials farther and wider with consistent spread patterns, and producing industry-leading productivity.

Depending on product, a F4365 with 1.38-m (54-in.) spinner height, can achieve spread widths from 18.92 to 27.43 m (60 to 90 ft), but with the increased clearance of 1.74 m (68 in.) the 4 Series Dry Spinner Spreader can achieve spread widths from 21 to 32 m (70 to 105 ft), Added spread width increases the number of acres per day and decreases the number of passes, which also reduces fuel costs and compaction.

Additionally, by combining the John Deere R4030, R4038, R4044, R4045, or R4060 Dry Spinner Spreader chassis and the New Leader® Dry Spinner Spreader, operators have the ability to maintain spread widths even when rpm is reduced. John Deere's pressure-and-flow-compensated hydraulics allows operators to maintain spinner speed throughout each pass, while maintaining consistent spread width and pattern. This added height allows a greater trajectory at a lower spinner speed and has the ability for later-season applications.

NOTE: With differences in fertilizer density, size, and crush strength, a spread pattern test is the only way to measure a product's true spread width and pattern.

By maintaining spread width, operators can consistently place product throughout the fields and prevent bottlenecking of product at row end. A full spread pattern and reducing overlap through integrated technologies, such as AutoTrac™ assisted steering and John Deere Section Control, the 4 Series Dry Spinner Spreader will allow for full product coverage while reducing input costs from overlap.

New Leader is a trademark of Highway Equipment Company.

The DN456 is designed to be MultApplier ready

DN456 with MultApplierDN456 with MultApplier

The optional 304 stainless-steel MultApplier insert provides machine flexibility as it can be ordered factory installed or field installed for dual product application. Bolt-in end gates and stainless-steel fittings make converting from a dual product to a single product dry spinner spreader easy. The MultApplier insert has a Bin 2 stuck capacity of 1.9 m³ (66 cu ft) offsetting the capacity of Bin 1 to 3.0 m³ (106 cu ft) 

The dual hopper system features two independent conveyors that can simultaneously apply up to two products at predetermined rates or variable rate application with swath widths up to 25 m (84 ft), decreasing time in the field, soil compaction, fuel consumption, and increasing return on investment.

Generation 4 CommandCenter™ display with SpreadStar™ system

Run screenRun screen

Model year 2018 4 Series Sprayers utilize the 4600 CommandCenter and SpreadStar controller allowing integrated control with the machine and dry spinner spreader.

The CommandARM™ controls, Gen4 CommandCenter display, and SpreadStar have been updated and tailored to the needs of operators allowing them to see all key functions on one run screen including AutoTrac™ assisted steering system, variable rate documentation, field totals, and dry spinner spreader settings.

The Gen4 CommandCenter display allows operators to set up and apply single or dual products, utilizing variable rate map-based prescriptions with John Deere Section Control functionality. Click anywhere on the display to expand and easily adjust information.

Work setupWork setup

To prepare for field application, simply press the Setup button in the bottom left corner of the display run page, and it will direct the user to the Work Setup window.

  1. Select the Location box to setup operator information including farm, field, and Operator information is not required to load and execute a variable-rate prescription.
  2. Select the Equipment box to do the initial setup of the machine including the number of bins in the dry spinner spreader.
  3. The Work Summary box shows a link for each bin in the dry spinner spreader. The screenshot above is for a two-bin dry box. Select each one to input or change the name of the product that will be applied. Twenty-four unique names can be entered into the display for various product types such as single product, blended product, or multi-product variable rate. The operator can also choose the target rate for spreading or load a variable-rate prescription.
SpreadStarSpreadStar

Once the Work Setup window is complete, the updated SpreadStar application can then be used to input and setup the following:

Target spread rateTarget spread rate

Target spread rate – selecting the target rate box allows the operator to quickly adjust three different target rates or load a prescription if needed. The target rates can be adjusted when spreading by using the corresponding buttons on the CommandARM.

Bin detailsBin details

Product density/product applied – selecting either of these areas will take the user to a bin details page where more frequent dry spinner spreader inputs and adjustments are made. For dry spinner spreaders with multiple bins, individual tabs at the top of the screen make it easy to quickly toggle between them.

Features on the bin details page include:

  • Bin on/off
  • Bin chaining (not shown)
  • Product density
  • CFR value
  • Feed gate opening
  • Bin alarms
  • Resetting bin counter
  • Belt prime
Spinner settings
Spinner settingsSpinner settings

The last step is to setup the spinner settings by clicking on the spinner settings box in the SpreadStar application. The Add Spinner preset window will come up allowing the operator to create a new preset if they choose.

Preset functions include:

  • Spinner target speed
  • Spinner target speed alarms
  • Spread width
  • Fan frame setting

The bin details and spinner settings are saved with the Work Summary details. For example, an operator with a two-bin dry spreader may need to change between a two product variable-rate to a single blend application using bin chaining. When the operator switches back to two product variable rate, SpreadStar will automatically remember the bin details and spinner settings that were last used with that configuration.

Even with this feature, it is still important to calibrate the dry spinner spreader when changing products to ensure an accurate and consistent spread pattern.

 

Key Specs

Compatible series R4030, R4038, and R4045 Self-Propelled Sprayers
Product spread Dry fertilizer or lime
Second product bin Optional
Multibin four-product bin
Spreader material 304 or painted 409 stainless steel
Capacity without second product bin 5.6 m3
200 cu ft
Capacity with second product bin 3 m3
106 cu ft
Multibin capacity
Spread pattern width with single-product bin 18.3 to 32 m
60 to 105 ft
Feedgate height 12.7 cm
5 in.
R4045: 27.9 cm
11 in.

Application system

Compatible series R4030, R4038, and R4045 Self-Propelled Sprayers
Product spread Dry fertilizer or lime
Second product bin Optional
Multibin four-product bin
Spreader material 304 or painted 409 stainless steel
Conveyor system #4 belt over chain
Rate control make SpreadStar™ rate controller

Capacity

Capacity without second product bin 5.6 m3
200 cu ft
Capacity with second product bin 3 m3
106 cu ft
Capacity of second product bin 1.9 m3
66 cu ft
Multibin capacity

Spread width range

Spread pattern width with single-product bin 18.3 to 32 m
60 to 105 ft
Spread pattern width with second-product bin 18.3 to 25.6 m
60 to 84 ft

Weight

Estimated spreader weight 1467 kg
3240 lb
Second product bin weight 431 kg
950 lb
Multibin four-product bin weight

Dimensions

Feedgate height 12.7 cm
5 in.
R4045: 27.9 cm
11 in.
Body length With spinner frame
437.5 cm
172 in.
335.3 cm
132 in.
Body length of second bin insert 152.4 cm
60 in.
Body width With spinner frame
321.6 cm
127 in.
243.8 cm
96 in.
Body height 144.4 cm
56.85 in.

Spinner

Disk diameter 61 cm
24 in.
Fins per disk Four

Additional information

Date collected