Double tap to zoom

875/876 Series Tilloll 875-10D

Reduce field trips and save money with the Tilloll from Landoll. Level, incorporate and bring the soil to a nearly perfect planting condition in one pass.

  • Get a Quote

    Get A Quote

    Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.

  • Contact an Expert

    Contact an Expert

    Fields with asterisks* are required. Your expert will receive an email that contains a reference to this page.

Share This Product:



  • Laser Cut, Robotically Welded Frame
  • T-Type Self-Leveling Hitch
  • 7 1/2 Degree Wing Float Up and Down
  • Rock Flex Bearing Standards on Disc Gangs and Incorporation Reel
  • Mechanical Ratchet Depth Adjustment
  • 20” Concave Disc Blades Spaced at 7 1/2”
  • 10 Degree Gang Angle
  • Spring Loaded Scrapers
  • Soil Deflector/Spray Shields on Disc Gangs
  • Spring Clamp Shanks with 150 lbs. Point Load
  • Edge Bent Shanks
  • 8” Shank Spacing with 10” Sweeps
  • Heavy-Duty 3 Bar Spike Harrow with Adjustable Down Pressure
  • Yellow Powder Coat Paint
  • Safety Warning Lights


Model 875-10D
Approximate Weight 5,059 lbs. (2,295 kg)
Working Widtd 10 ft. 6 in. (3.2 m)
Transport Widtd 12 ft. 0. (3.7 m)
Transport Height N/A
Type of Fold Non-Folding
Number of Shanks 14
Shank Type Spring Clamp, Edge Bent Shank
Shank Size 0.5625 in. x 1.75 in. (14.3 x 44.5 mm)
Point Load 150 lbs. (68 kg)
Shank Spacing 9 in. (229 mm)
Under Frame Clearance 25.5 in. (648 mm)
Sweeps 10 in. (254 mm)
Number of Blades 14
Soil Deflector/Spray Shield Mounted Behind Gangs
Blade Diameter 20 in. (508 mm)
Blade tdickness 0.197 in. (5.0 mm)
Blade Concavity Low Concavity
Blade Spacing 7.5 in. (191 mm)
Reversible Blade Scrapers 4 in. x 0.179 in. (102 x 4.5 mm)
Gang Protection Rock Flex Mount
Gang Spool 3.5 in. x 3.0625 in. (89 x 78 mm)
Gang Angle 10 Degree
Gang Shaft 1.5 in. (38.1 mm)
Gang Bearings 1.5 in. (38.1 mm) Flange Type Greaseable
Chopper Reel and 3-Bar Spike Drag Standard
Chopper Reel Size 16 in. (406 mm) Diameter
Chopper Reel Bars 5-Bar, 0.281 x 4 in. (7.1 x 102 mm) Beveled
Chopper Reel Bearings Trunnion Bearings witd C-Flex Protection
Chopper Reel Angle Mounted at 10 Degree Angle
3-Bar Spike Drag Adjustable Down Pressure
3-Bar Spike Drag Angle Adjustable
Spike Size 0.75 in. x 11 in. (19.0 x 0279 mm)
Spike Spacing Spaced on 2.5 in. (63.5 mm) Centers
Frame Sizes 3 in. x 3 in. x 0.25 in. (76.2 x 76.2 x 6.4 mm) and 4 in.x 3 in. x 0.25 in. (102 x 76.2 x 6.4 mm)
  4 in. x 4 in. x 0.25 in. (102 x 102 x 6.4 mm) and 6 in. x 4 in. x 0.25 in. (153 x 102 x 6.4 mm)
Frame Construction Laser Cut/Matchcut Components, Robotically Welded
Transport Lift Axles Indvidual Wheel Arm Weldment
Walking Tandems Standard
Wing Axles N/A
Walking Tandems on Wings N/A
Wing Flex N/A
Tire Size - Main Frame (4) 11L x 15-10 Ply
Wheel Hubs - Main Frame 6-Bolt
Spindles - Main Frame 2 in. (50.8 mm) Slip-In Spindles
Tire Size - Wing Frame N/A
Wheel Hubs - Wing Frame N/A
Spindles - Wing Frame N/A
Hitch Type Self-Leveling witd Manual Adjustment
Hitch Category Cat. II Single Lip
Machine Deptd Control Stroke Control on Master Cylinder
Safety Warning Lights and SMV Emblem Standard
Safety Chain Kit Standard
Powder Coat Paint, Yellow Standard
10 in. Ultra Wing Sweeps Optional
Cat. III Single Lip Hitch Clevis (2 in. Hole) Optional
Cat. IV Single Lip Hitch Clevis (2.25 in. Hole) Optional
Horsepower Requirements 9 to 11 HP (7 to 8 kW) per Foot