Landoll 2110-9 Shoppa's Farm Supply, Texas

Double tap to zoom

2100 Coulter Chisel 2110-9

Manage heavy residue conditions at higher speeds with maximum efficiency with the Landoll 2100 Coulter Chisel.

Get a Quote
Get A Quote

Fields with asterisks* are required. Please email our helpful staff with any questions or comments using the contact form.
Name*

Email*

Phone*

Nearest Location*

Department*

Model

Have a trade in?

Yes

No

Make

Model

Year

Hours

Years Owned

Condition

Quote Request Detail and Comments*
Contact an Expert

Contact an Expert

Fields with asterisks* are required. Your expert will receive an email that contains a reference to this page.

Full Name*

Email*

Phone*

Nearest Location

Department*

Comment/Message*

Share This Product:

Features
Specs

Features

Laser Cut, Robotically Welded Frame
5 1/2” Lift Axles with Maintenance-Free Lift System
Walking Tandems on All Sizes Except 7- Shank Models
Slip-In Spindles
12.5L x 15-12 Ply or 32/1550 x 16.5L Tires (Model Dependent)
Self-Leveling Hitch
Cast Single Lip Hitches Cat. III on 7 and 9 Shanks; Cat. IV on 11 Shanks and Larger
Single Point Depth Control
22” Coulters with 7 1/2” Spacing Provides Each Shank with Leading Coulter
Solid Cast Coulter Spools
1 3/4” Gang Bolt
Trunnion Mount Bearings
C-Cushion Bearing Mounts
Auto-Reset Shanks with 32” Under Frame Clearance
Rigid Shear Bolt Shanks with 32” Under Frame Clearance
Choice of Straight or Twisted Points and Shovels
Adjustment/Maintenance Wrenches
Blue Powder Coat Paint
Safety Warning Lights

Specs

With Auto-Reset Shanks

Model	2110-9
Approximate Weight	9,348 lbs. (4,240 kg)
Working Width	11 ft. 3 in. (3.4 m)
Transport Width	11 ft. 9 in. (3.6 m)
Transport Height	N/A
Number of Coulter Blades	19
Blade Spacing	7.5 in. (191 mm)
Blade Size	22 in. x 0.25 in. (559 x 6.4 mm)
Coulter Protection	Spring Cushioned/C-Flex
Blade Scrapers	Heavy-Duty 0.3125 in. x 6 in. (7.9 x 152 mm)
Blade Scraper Mount	C-Cushion Mounted
Gang Spools	5.5 in. (140 mm) Diameter Solid Cast
Gang Shaft	1.75 in. (44.5 mm) Round
Number of Bearings	4
Gang Bearing Type	C-Cushion Trunnion Mount, Greaseable Triple Lip Seals
Number of Shanks	9
Shank Type	Auto-Reset
Shank Spacing	15 in. (381 mm)
Shank Mounts	Wrap-Around Design
Shank Arms	5 in. x 3 in. x 0.375 in. (127 x 76.2 x 9.5 mm)
Point Load - Auto Reset	1,750 lbs. (794 kg)
Trip Height	14 in. (356 mm)
Shank Size	1.25 in. x 2.5 in. (31.8 x 63.5 mm)
Standard Shovels	4 in. (102 mm) Twisted
Point Angle	50 or 60 Degree
Shank Offset	12 in. (305 mm) on Rear Bar
Under Frame Clearance	32 in. (813 mm)
Frame	6 in. x 4 in. x 0.375 in. (152 x 102 x 9.5 mm)
Frame Construction	Laser Cut/Matchcut Components, Robotically Welded
Transport Lift Axles	5.5 in. (140 mm) with UHMW Maintenance Free Pivots
Transport Axle Type	Walking Tandems with Greaseable Pivots
Tire Size - Main Frame	(4) 12.5L x 15, 12 Ply
Wheel Hubs - Main Frame	8-Bolt
Spindles - Main Frame	2.25 in. (57.2 mm) Slip-In Spindles
Tire Size - Wing Frame	N/A
Wheel Hubs - Wing Frame	N/A
Spindles - Wing Frame	N/A
Hitch Type	Self-Leveling with Manual Adjustment
Hitch Category	Cat. III Single Lip with 2.0 in. (50.8 mm) Hole
Machine Depth Control	Single Point, Front Mounted
Weight Kits Needed	With Attachment - 4 Required, Without Attachment - 1 Required
Safety Warning Lights and SMV Emblem	Standard
Safety Chain Kit	Standard
Adjustment Wrenches	Standard
Powder Coat Paint, Blue Sapphire	Standard
Rear Jack	Standard, When Equipped with Chopper Reel
Cat. III Single Lip Hitch Clevis (2 in. Hole)	Standard
Cat. IV Single Lip Hitch Clevis (2.25 in. Hole)	Optional
Cat. V Single Lip Hitch Clevis (3 in. Hole)	N/A
2 in. Straight Points	Optional
2 in. Straight Points with Chrome Cap	Optional
3 in. Twisted Shovels	Optional
Rear Hitch	Optional
Rear Hitch With Hydraulic Hoses	Optional
Spare Tire & Wheel Assembly	Optional
Horsepower Requirements	20 to 30 HP (15 to 22 kW) per Shank

With Rigid Shear Bolt Shanks

Product Attributes	2110-9
Approximate Weight	8,405 lbs. (3,812 kg)
Working Width	11 ft. 3 in. (3.4 m)
Transport Width	11 ft. 9 in. (3.6 m)
Transport Height	N/A
Number of Coulter Blades	19
Blade Spacing	7.5 in. (191 mm)
Blade Size	22 in. x 0.25 in. (559 x 6.4 mm)
Coulter Protection	Spring Cushioned/C-Flex
Blade Scrapers	Heavy-Duty 0.3125 in. x 6 in. (7.9 x 152 mm)
Blade Scraper Mount	C-Cushion Mounted
Gang Spools	5.5 in. (140 mm) Diameter Solid Cast
Gang Shaft	1.75 in. (44.5 mm) Round
Number of Bearings	4
Gang Bearing Type	C-Cushion Trunnion Mount, Greaseable Triple Lip Seals
Number of Shanks	9
Shank Type	Rigid Shear Bolt
Shank Spacing	15 in. (381 mm)
Shank Mounts	Wrap-Around Design
Shank Arms	5 in. x 3 in. x 0.375 in. (127 x 76.2 x 9.5 mm)
Trip Height	14 in. (356 mm)
Shank Size	1.25 in. x 2.5 in. (31.8 x 63.5 mm)
Standard Shovels	4 in. (102 mm) Twisted
Point Angle	50 or 60 Degree
Shank Offset	12 in. (305 mm) on Rear Bar
Under Frame Clearance	32 in. (813 mm)
Frame	6 in. x 4 in. x 0.375 in. (152 x 102 x 9.5 mm)
Frame Construction	Laser Cut/Matchcut Components, Robotically Welded
Transport Lift Axles	5.5 in. (140 mm) with UHMW Maintenance Free Pivots
Transport Axle Type	Walking Tandems with Greaseable Pivots
Tire Size - Main Frame	(4) 12.5L x 15, 12 Ply
Wheel Hubs - Main Frame	8-Bolt
Spindles - Main Frame	2.25 in. (57.2 mm) Slip-In Spindles
Tire Size - Wing Frame	N/A
Wheel Hubs - Wing Frame	N/A
Spindles - Wing Frame	N/A
Hitch Type	Self-Leveling with Manual Adjustment
Hitch Category	Cat. III Single Lip with 2.0 in. (50.8 mm) Hole
Machine Depth Control	Single Point, Front Mounted
Weight Kits Needed	With Attachment - 4 Required, Without Attachment - 1 Required
Safety Warning Lights and SMV Emblem	Standard
Safety Chain Kit	Standard
Adjustment Wrenches	Standard
Powder Coat Paint, Blue Sapphire	Standard
Rear Jack	Standard, When Equipped with Chopper Reel
Cat. III Single Lip Hitch Clevis (2 in. Hole)	Standard
Cat. IV Single Lip Hitch Clevis (2.25 in. Hole)	Optional
Cat. V Single Lip Hitch Clevis (3 in. Hole)	N/A
2 in. Straight Points	Optional
2 in. Straight Points with Chrome Cap	Optional
3 in. Twisted Shovels	Optional
Rear Hitch	Optional
Rear Hitch With Hydraulic Hoses	Optional
Spare Tire & Wheel Assembly	Optional
Horsepower Requirements	20 to 30 HP (15 to 22 kW) per Shank

Landoll 2110-9

2100 Coulter Chisel 2110-9

Get A Quote

Contact an Expert

Features

Specs

Shoppa's Connect Log In

CAN SHOPPA'S HELP YOU FIND SOMETHING?