Search Inventory    Search Products & Site

Rotary Cutters

 

images products cutters fx742FX-742 ROTARY CUTTER

  • 42’ (12.8m) cutting width makes long days short again. Use 1 cutter where traditionally 2 or 3 cutters were needed. Cover more ground & reduce the number of tractors and fuel costs.
  • Unique 5-plex design flexibility allows for a 118” (3m) transport width.
  • Available with stump jumpers for pasture and grass maintenance or with Schulte’s fixed knife and baffle technology for mulching crop residue such as straw, corn or cotton stalks.
  • Unmatched reliability with a premium Bondioli & Pavesi SFT drive & gearbox system.
  • Size 10 main CV with an over running clutch provides worry free shut downs.
  • Fully compatible for all row crop cutting in 30”, 32”, 38”, 40” and one metre row spacing.
  • A parallel solid tongue hitch maintains even load on the tractor draw bar.
  • Full rubber grommet suspension across the entire unit reduces shock loading and maintains even cutting, even in the roughest of conditions.
  • Unique driveline arrangement allows for independent clutch protection for each down rotor.
  • A continuously welded 10 gauge domed deck adds strength and durability.

 

 

images products cutters fx530FX-530 ROTARY CUTTER

  • 30’ of mowing and shredding excellence
  • Accommodates 30”, 32”, 36”, 38" row spacings
  • Excellent shredding and distribution capabilities on Fixed Knife units
  • Unique drive layout allows for clutch at every down box
  • Spun formed pans available on pan unit
  • Floating hitch with rubber grommet rear suspension
  • Phasing system for a parallel lift cut
  • Non-adjustable clutches provide low maintenance
  • Available Cyclone Deck Debris Fan Kit
  • 350hp, 60 degree splitter gearbox allows for unique driveline layout

 

 

images products cutters 50265026 ROTARY CUTTER

  • 1000 RPM drive line with heavy duty slip clutches and 80 constant velocity u-joint.
  • Round skid pans on standard unit.
  • 2-piece replaceable skid shoes on wings.
  • 10 GA deck with deck protection rings.
  • 7.00 x 15 light truck tires in quantities of 6 or 8.
  • Hydraulic phasing cylinders for level lift.
  • Double acting wing lift cylinders with mechanical float.
  • Spring steel bushings at all major pivot points.
  • Suspension for centre and wing frames.
  • Transport locks for centre section and wings.
  • An optional fixed shredding blade kit is available for enhanced shredding.
  • 50 degree splitter box keeps drive lines short and machine more compact.

 

 

images products cutters fx520FX-520 ROTARY CUTTER

  • 5 Rotor design optimizes cutting performance, increases productivity and delivers extremely even distribution over competitors 20’ models.
  • Unique 6 Gear Box layout, 260 hp divider box, 190 hp down boxes, 1000rpm driveline gives unsurpassed cutting performance with higher cut speeds.
  • 5 Slip Clutches, 1 at each down box protects the drive line. Also, shear pin at the input shaft on the divider box.
  • Continuously welded 7 ga modular deck design improves strength and reduces rusting.
  • Hitch Lift Assist helps to lift the mower over obstacles so as to prevent undo stress on blades and down shafts.
  • A hydraulic phasing cylinder system ensures an accurate parallel lift across the cutter.

 

 

images products cutters fx318FX-318 ROTARY CUTTER

  • Schulte's first 18’ Flex Wing mower
  • An ultra narrow transport width makes moving this unit extremely safe and simple
  • Run with the same HP tractor as most 15’ flex wings, but gain the extra 3’ cutting width
  • Excellent choice for mowing crop residue, pastures, weeds, orchards and roadsides
  • Single 7 gauge domed deck sheds water and debris and increases life of the deck with this easy clean feature
  • Available 540rpm or 1000rpm 80° CV drive or 540 equal angle non CV drive
  • Heavy duty gearboxes & drive system with spun formed 7gauge stump jumpers ensures durability & perfect balance

 

 

XH 1500 Series 4 webXH-1500 SERIES 4 INDUSTRIAL GRADE CUTTER

  • New, extra heavy duty, high horsepower Bondioli gearboxes with new oil level sight glass and 1-3/4" input shafts and 3” (75mm) output shaft
  • New extra heavy duty Bondioli G8 drive lines
  • New high-torque wing clutches ensure better performance in rough cutting
  • Fitted with replaceable spring steel bushings at all major pivot locations to increase the ease of maintenance and life of the machine.  New locations include the pivot points on the hitch, tension links, center suspension, wing suspension and all wheel standards.
  • Single domed, sweep clean deck design eliminates excess weight over competitive double-deck designs, eliminates build up of debris and prevents rusting on top side of deck
  • Tandem walking axles result in smooth operation over rough surfaces
  • A deep cutting chamber coupled with high blade tip speeds result in a superior cut & unsurpassed material flow
  • 24" severe duty tires, transport height is increased to 17.5" along with improved performance in wet conditions
  • Lower pressure 8" stroke hydraulic phasing cylinders for a level lift
  • Low maintenance CV Tractor Shaft or Patented 540rpm Equal Angle Hitch available
  • Serviceable, bolt on hitch swivel
  • Center suspension reduces stress on tractor drawbar
  • 3/8” thick formed deck protection rings prevent blade to deck contact
  • Double safety chains with individually replaceable links are standard equipment

 

 

images products cutters fx1800FX-1800 ROTARY CUTTER

  • A single domed 7 ga continuously welded deck makes the cutter extremely easy to clean,prevents water pooling and rusting and helps shed debris.
  • 6.5 ” blade overlap and high blade tip speeds.
  • A four gearbox drive line with independent slip clutches.The FX-1800 utilizes heavy-duty and extremely reliable Bondioli gearboxes.The splitter has 1 3/4 ” 20 spline input and output shafts and is rated at 260hp. The centre and wing boxes have 1 3/4 ” 20 spine input shafts,2 3/8 ” down shafts and are rated at 210hp.
  • An 80 degree CV shaft allows for smooth power transmission during tight turns.The CV for 540 rpm is a Category 6 and for 1000 rpm is a category 5 The driveline on the cutter itself employs self adjusting friction clutches to protect your investment and always operate at peak performance.All clutches are located under the main shield for ease of service.
  • Spun formed 7gauge stump jumpers (round skid pans) ensure durability and balance.
  • Available in 540 or 1000rpm drive.

 

 

images products cutters fx315FX-315 ROTARY CUTTER

  • Residue Distribution Tailboard ensures maximum distribution while maintaining a safe working environment.
  • Heavy duty drive package includes 260hp splitter box and 210hp right angle boxes.
  • Single domed, sweep clean deck design eliminates excess weight over competitive double deck designs, reduces build up of debris and prevents rust from moisture.
  • Variable Position Shrouding allows you to change your material flow underneath your cutter to maximize shredding and distribution.
  • New patent pending replaceable deck ring.
  • The Speed Leveling system minimizes setup and switch over time for front to back leveling for different draw bar heights from tractor to tractor.
  • Extremely Narrow Transport width of 99”.
  • A 13 3/8” frame depth & increased blade tip speeds for superior cutting and flow material.

 

 

images products cutters v1280V1280 ROTARY CUTTER

  • Extra large 12.5L X 15 tires provide outstanding floatation even in wet conditions.
  • Center section tires are adjustable so they can be placed outside the tractor tire tracks.
  • Wing gauge wheels include a precise leveling adjustment and rubber shock bumper. New wing wheel design allows for free movement in all directions.
  • A single hydraulic cylinder is used to lift both wings, however each wing section can follow ground contours independently of the other.
  • Double acting hydraulic cylinders are used to raise and lower the machine. These cylinders avoid the rusting problems that often occur with single acting hydraulic cylinders.
  • The lift linkage for the main frame provides enough range to lower the machine into a 25° furrow and still provide good transport clearance

 

 

images products cutters fx1200FX-1200 ROTARY CUTTER

  • A single domed 7 ga continuously welded deck makes the cutter extremely easy to clean,prevents water pooling and rusting and helps shed debris.
  • 6.5 ” blade overlap and high blade tip speeds.
  • A four gearbox drive line with independent slip clutches.The FX-1800 utilizes heavy-duty and extremely reliable Bondioli gearboxes.The splitter has 1 3/4 ” 20 spline input and output shafts and is rated at 260hp. The centre and wing boxes have 1 3/4 ” 20 spine input shafts,2 3/8 ” down shafts and are rated at 210hp.
  • An 80 degree CV shaft allows for smooth power transmission during tight turns.The CV for 540 rpm is a Category 6 and for 1000 rpm is a category 5 The driveline on the cutter itself employs self adjusting friction clutches to protect your investment and always operate at peak performance.All clutches are located under the main shield for ease of service.
  • Spun formed 7gauge stump jumpers (round skid pans) ensure durability and balance.
  • Available in 540 or 1000rpm drive.

 

 

XH1000 Series 4XH-1000 SERIES 4 INDUSTRIAL GRADE CUTTER

  • New, extra heavy duty, high horsepower Bondioli gearboxes with new oil level sight glass and 1-3/4" input shafts and 3” (75mm) output shaft
  • New extra heavy duty Bondioli G8 drive lines
  • New high-torque wing clutches with high slip release settings ensure better performance in rough cutting
  • Single domed, sweep clean deck design eliminates excess weight over competitive double deck designs, eliminates build up of debris and prevents rusting on top side of deck
  • Tandem walking axles result in smooth operation over rough surfaces
  • Increased frame depth & blade tip speed results in a superior flow of material
  • With larger 24" aircraft tires, transport height is increased to 17.5" along with improved performance in wet conditions
  • Lower pressure 8" stroke hydraulic phasing cylinders for a level lift
  • Low maintenance Constant Velocity Tractor Shaft or Patent Pending 540rpm Equal Angle Hitch available
  • Center suspension reduces stress on tractor drawbar
    3/8” thick formed deck protection rings prevent blade to deck contact
  • Double safety chains with individually replaceable links are standard equipment
  • Large high horsepower gearboxes with 1-3/4" input shafts and 2-3/8" output shafts, 260hp divider, 210hp center & wings
  • Higher slip clutch release settings than previous design ensures better performance in rough cutting
  • 1/4” thick stump jumpers with patent pending Pentagon Blade Bolt design allows cutter sections to ride over obstructions

 

 

images products cutters flexarmFLX-1510 FLEX ARM

  • Increase operator safety, comfort and performance with the revolutionary Schulte Flex-Arm.
  • The Schulte Flex-Arm allows the operator to travel on the road while his Schulte 10’ or 15’ rotary cutter cuts the ditch slope.
  • The tractor does not have to ride on the ditch slope so rollovers are very low risk. As an added bonus, wear & tear on the tractor is greatly reduced.
  • Operator comfort is greatly increased. Operators who have had a chance to use the Schulte FLEX-ARM say comfort & safety are the best features.
  • Visibility is improved. The operator is placed in a better position to view obstacles before they reach the rotary cutter.
  • The FLEX-ARM and Schulte cutter can be used in wet conditions, which could make cutting more difficult if the tractor had to ride on the slope.
  • Because of the unique way in which the FLEX-ARM is attached to the rotary cutter, it can be easily backed up to cut around approaches and other obstacles.

 

 

FX 209 2FX-209 ROTARY CUTTER

  • Push or pull capability 
  • Rigid single domed 7 guage deck construction
  • 1/4” x 4” deck protection ring to guard against blade to deck damage
  • Two rotor base unit common to all configuration
  • Pull type, three point, semi mount and semi mount swing hitching options
  • 540 and 1000 RPM drive options
  • 9ft / 3m overall width
  • Heavy duty gear boxes and G8 drive lines
  • Pull type unit has the ability to accept open clevis, solid tongue, adjustable clevis or precision hitch options
  • Four tire options: solid laminate, severe duty, severe duty foam filled or forklift tires

 

 

FX 107 7 Foot Cutter Side WebFX-107 ROTARY CUTTER

  • Rigid single domed 7 gauge deck construction   
  • 1/4” x 4” deck protection ring to guard against blade to deck damage
  • Base unit common to all configurations
  • Pull type and 3 point hitching options
  • Larger pan with shorter blades provides more durability
  • 540 RPM drive
  • Heavy duty gear box and drive line, the same units as on our large cutters
  • Pull type unit has the ability to accept open clevis, solid tongue, adjustable clevis or precision hitch options
  • Tire options on pull type: solid laminate, severe duty, severe duty foam filled or forklift tires
  • Tire options on 3 pt: Solid Laminate Castor tires
  • Double safety chains standard front and rear on all units

APPLY FOR FINANCING TODAY!