Search Inventory    Search Products & Site

Double tap to zoom

 

Features

  • John Deere PowerTech™ PSS 9.0L
  • New and improved e18™ PowerShift Transmission
  • New CommandView™ III cab

Specifications

Engine  
Manufacturer John Deere
Engine family PowerTech? PSS 9.0L
Aspiration Dual Series Turbocharger w/fixed geometry first stage-variable geometry second stage - air-to-air aftercooling and cooled exhaust gas recirculation
Cylinders/Displacement, cu. in. (L) 9.0 L (548 cu in.)
Cylinder Liners Wet-sleeve
Fuel tank capacity, US Gal. (L) (Open; Cab) Standard 310 U.S. gal. (1173 L)
Performance  
Advertised PTO hp (kW) @ Rated rpm 335 hp (250 kW)
Advertised Engine hp (kW) @ Rated speed 370 hp (272 kW)
Max Torque Rise (80% rtd spd) @ Eng rpm 38 percent
Transmission  
Std. Transmission; Forward/Reverse e18? 18-speed PowerShift 40 kph (25 mph); 18F, 6R with Efficiency Manager?
Reverser No
On-the-Go Shifting (Yes/No/Partial) Yes
Power Take-Off (PTO)  
Optional    45 mm
1.75 in.
20-spline
1000 rpm
PTO Actuation Electronic
Hydraulics  
Type Closed-center, pressure/flow compensated
Pump Rated Output, GPM (L/min.)     Standard
220 L/min
58 gpmOptional
435 L/min
115 gpm
Rated Flow @ One SCV, GPM (L/min.)        Standard coupler: 132 L/min
35 gpm
12.7 mm
0.5 in.
Optional coupler: 159 L/min
42 gpm
19.0 mm
0.75 in.
Maximum Operating Pressure, psi (kPa) 2900 psi (20,000 kPa)
Hitch Draft Control Load Sense Type Electrohydraulic
Remote Control Valves Available 4 - 6 factory, up to 8 field installed
Hitch Category (SAE Designation) 4N/Cat. 3, 4N/Cat. 4
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.       Standard
6804 kg
15,000 lbOptional
9072 kg
20,000 lb
6804 kg
15,000 lb
Sensing type Electrohydraulic
Final Drive  
Type Inboard planetary
Differential controls Full-locking electrohydraulic
Availability  Front & Rear
Standard
Engage On-the-Go Rear Differential Lock Yes
Axle Type Single reduction
Brakes, Type and Control Hydraulic power, wet disk, self adjusting on front and rear axle
Operator Station  
Cab    Doors
One - left handSeat Suspension System
Standard: Air
Optional: Active Seat™
4WD Dimensions  
Wheelbase, in. (mm) 149.9 in. (3807 mm)
Turning Radius w/o Brakes, ft (m)    5.55 - Group 47 Tires m
18.2 - Group 47 Tires ft
5.88 - Group 48 Tires m
19.3 - Group 48 Tires ft
Standard Tires  
4WD 620/70R46 in. 167A8 R1W radial in dual wheel configuration
Miscellaneous  
Country of Manufacture Waterloo, Iowa, USA
Ballasting Restrictions, lb (kg) 48,700 lb (Lesser of 22,105 kg) or Tire Capacity

APPLY FOR FINANCING TODAY!