John Deere X710

X710 for sale at Shoppa's Farm Supply. Serving your new and used equipment needs from Bay City, Beaumont, East Bernard, El Campo, Giddings, Liberty, Shiner, and Victoria, TX.

CroppedImage585335-JohnDeere-X710-2015.jpg

Model: X710

Get a Quote

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Features

  • Two-wheel drive with standard differential lock
  • Power, two-wheel steering for quick, precise control
  • Heavy-duty welded frame
  • 4-year/700-hour bumper-to-bumper warranty

Specifications

Engine  
Power 22 hp 16.4 kW
Displacement 45.5 cu in.745 cc
Manufacturer/model FD671D
Type Overhead valve, full-pressure lube, oil filter
Cylinders V-twin, cast-iron liners
Governor Mechanical
Choke/speed control Separate levers
Cooling method Liquid
Air cleaner Dry, replaceable with foam pre-cleaner
Oil drain No tools
Fuel System  
Type Gasoline
Fuel delivery Pulse pump and carburetor
Fuel gauge Gauge on dash
Fuel tank location Rear
Fuel fill opening On left fender, 3 in.7.6 cm
Fuel tank capacity 5.2 U.S. gal.19.7 L
Electrical System  
Battery 12 V 300 CCA
Charging system Flywheel alternator, regulated, 20 amp
Engine starter Solenoid shift
Hour-meter Yes
Headlights Two standard, halogen, 37 W
Taillights or reflector Taillights
Backup lights Yes
Rear work lights Yes
12-V outlet Yes
Trans-axle  
Type K90 hydrostatic integrated with trans-axle
Control Twin Touch™ pedals
Cruise control Yes
Oil cooler Yes
Oil filter Replaceable suction side 10 micron
Differential lock Standard
Forward speed 0-8.5 mph 0-13.7 km/h
Reverse speed 0-6 mph 0-9.7 km/h
Brakes Internal wet disc
Chassis  
Frame Welded heavy-duty
Primer/paint E-coat/powder
Weight bracket Standard front - holds up to four Quik-Tatch weights, 42 lb 19 kg
Receiver hitch Yes, front
Front axle JDM BA8 nodular iron casting
Spindle bushings Metal, replaceable
Front tires 18 x 8.50-8 turf
Rear tires 26 x 12-12 turf
Hood material Noryl GTX902, painted
Fender deck material RIM with in-mold paint
Floor mats Sure-grip rubber
Storage Covered toolbox
Service interval decal Yes
Fender handles/grips Handles
Cup holder Yes
Equipment mounting Optional category 1 3-point hitch
Steering  
Type Hydraulic power
All-wheel steer Not available on this model
Steering wheel 14 in.35.6 cm
Tilt steering wheel Standard, six position
Turning radius 25 in.63.5 cm
Uncut circle radius 54 HC, 32 in.81.3 cm; 60 HC, 28 in.71.1 cm
Seat  
Type Two piece professional high-back
Seat back height 21 in.53.3 cm
Armrests Optional
Fore-aft adjustment While seated, slide rail, 14-position, 7 in.17.8 cm
Seat suspension Six-position parallel arm
Lift System  
Type Two-function hydraulic
Hydraulic outlets Four, optional
Mower cut height 1-5.25 in.2.5-13.3 cm
Cut height increments 0.25 in.0.64 cm
Preset cut height Yes
Mower deck  
Type Side discharge
Cutting width 48, 54, 60 in.122, 137, 152 cm
Construction Stamped steel deck shell
Mower deck material 48A, 10 gauge 0.135 in.3.4 mm; 54 HC and 60HC, 9 gauge 0.150 in.3.8 mm
Mower wash port Yes
Mower drive system Hydraulic clutch, shaft
Mower wheels Four
Mower wheel adjustment Spring-loaded pin
Mower level adjustment Exact Adjust ports and on-board deck-leveling gauge
Mower attach-ability  
Type Roll under tractor (48A) Drive-over deck (54, 60 HC)
Front draft arms Over-center
Rear draft arms V-align
Mower wheels rotate Yes, 90 degrees for easy mower removal (48A), N/A (54 HC, 60 HC)
Drive system Shaft or Auto-connect
Safety  
Meets ANSI standard Yes
Meets OPEI standard Yes
Backup protection Reverse Implement Option (RIO)
Safety video Yes
Buyers Notes Hydraulic modulated PTO clutch for smooth mower and implement engagement One-piece hood for easy engine access 540 rpm rear PTO and 3-point hitch options available
Warranty 4 year/700 hour bumper-to-bumper** (**Term limited to years or hours used, whichever comes first, and varies by model. See the LIMITED WARRANTY FOR NEW JOHN DEERE TURF AND UTILITY EQUIPMENT at JohnDeere.com or JohnDeere.ca/TUWarranty for details.)
Optional Equipment  
Mowers 48A, 54 HC, 60 HC
Rear bagger 7, 14, 19, 42 bu 250, 500, 670, 1480 L
Powered material collection Power Flow, 7, 14, 19, 42 bu 250, 500, 670, 1480 L
Mulching system Yes, MulchControl™
Front thatcher 38, 46, 54 in.96.5, 116.8, 137.2 cm
Front blade 54 in.137.2 cm
Mid-mount blade ---
Snow blower Two-stage, 47, 54 in.119.4, 137.2 cm
Rotary broom 52, 60 in.132.1, 152.4 cm
Rotary tiller 42, 48 in.106.7, 121.9 cm
Sleeve hitch ---
3-point hitch Category 1
Rear power take-off (PTO) 540 rpm
Plow, moldboard Adjustable, 8-14 in.20.3-35.6 cm
Box scraper 48 in.121.9 cm
Cultivator Adjustable, 30-46 in.76.2-116.8 cm
Rear blade 60 in.152.4 cm
Disk harrow Adjustable, 42-52 in.106.7-132.1 cm
Landscape rake 60 in.152.4 cm
Sprayer Tow-behind, 15, 25, 45 U.S. gal. 56.8, 94.6, 170.3 L; Mounted, 25 U.S. gal. 94.6 L
Spreader Tow-behind, 125, 175 lb 57.7, 79.4 kg; Mounted, 125 lb 57.7 kg
Front bumper Standard bumper/weight bracket
Brush guard Yes
Weather protection Hard-side cab, weather enclosure
Sun canopy ---
Rear receiver hitch 1.25 x 1.25 in.  3.18 x 3.18 cm
Bucket holder Yes, double bucket
Grass striping Grass groomer kit, 48-in. (122 cm) mower only
Tractor shovel 54 in.137.2 cm
Front loader Not available
Other equipment ---
Tow-behind tools 21
Dimensions  
Height 51.2 in.130 cm
Overall length 75 in.190.5 cm
Wheelbase 54.5 in.138.5 cm
Width with mower 48A, 62.5 in.159 cm; 54 HC, 64.5 in.163.8 cm; 60 HC, 74 in.188 cm
Width with mower (deflector raised for storage) 48A, 53.6 in.136 cm; 54 HC, 57.5 in.146.1 cm; 60 HC, 62 in.157.5 cm
Width without mower 47 in.119.4 cm
Weight No fuel or mower, 863 lb 391.5 kg
 
Don't show this again