John Deere 5045E

5045E for sale at Shoppa's Farm Supply. Serving your new and used equipment needs from Bay City, Beaumont, East Bernard, El Campo, Giddings, Liberty, Shiner, and Victoria, TX.

CroppedImage585335-JohnDeere-5045E.jpg

Model: 5045E

Get a Quote

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Features

  • MFWD
  • 9F/3R transmission.
  • Open operator's station.

Specifications

Manufacturer John Deere
Model 5045E (2016)
Official Test  
Nebraska Test number  Factory Observed  
Engine  
Manufacturer  John Deere PowerTech 3029  
Engine family  ---  
Aspiration  Turbocharged  
Cylinders/Displacement, cu. in. (L)  2.9 L 
   3/179 cu in. 
Cylinder Liners  Wet Sleeved  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  68.0 L 
   18.0 U.S. gal. 
Optional  ---  
Underhood muffler  Yes  
Performance  
Advertised PTO hp (kW) @ Rated rpm  27.5 kW @ 2100 rpm  
   37 PTO HP @ 2100 rpm  
Official PTO hp (kW) @ Rated rpm  ---  
@ Standard PTO @ Eng rpm  ---  
Maximum @ Eng rpm  ---  
Advertised Engine hp (kW) @ Rated speed  37.2 kW @ 2100 rpm  
   50 HP @ 2100 rpm  
Max Unballast Drwbr hp (kW) @ Eng rpm  ---  
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  ---  
Max Torque Rise (80% rtd spd) @ Eng rpm  ---  
Maximum Torque Rise % (PTO) @ Eng rpm  ---  
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  ---  
Standard PTO Speed @ Eng speed  ---  
Maximum PTO Power @ Eng rpm  ---  
Maximum Engine Power @ Eng rpm  ---  
Max Unballasted Drawbar Power @ Eng rpm  ---  
75% Load, Full Engine rpm (Unballasted)  ---  
75% Load @ Reduced rpm (Unballasted)  ---  
Transmission  
Std. Transmission; Forward/Reverse  9F/3R SyncShuttle  
Opt. Transmission; Forward/Reverse  ---  
Reverser  No  
On-the-Go Shifting (Yes/No/Partial)  Partial  
Clutch; Wet/Dry  Dry  
Creeper  ---  
Power Take-Off (PTO)  
Standard  Independent 540  
Optional  ---  
PTO Speeds @ Engine rpm  540 @ 2100 rpm 
PTO Actuation  Mechanical (lever)  
Hydraulics  
Type  Open Center  
Pump Rated Output, GPM (L/min.)  ---  
Standard  68.9 L/min 
   18.2 gpm 
Optional  ---  
Rated Flow @ One SCV, GPM (L/min.)  43.1 L/min 
   11.4 gpm 
Max Output @ SCV Couplers, GPM (L/min.)  ---  
Maximum Operating Pressure, psi (kPa)  ---  
Maximum Hydraulic Power, hp (kW)  ---  
Hitch Draft Control Load Sense Type  Mechanical  
Remote Control Valves Available  1 (2 opt.)  
Hitch Category (SAE Designation)  2 ; convertible to 1  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  1448 kg 
   3192 lb 
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  Top Link  
Joystick SCV control  2WD- FIK MFWD-Std  
Final Drive  
Type  Planetary  
Differential controls  Mechanical (Pedal)  
Availability  ---  
Front  No  
Front & Rear  No  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Flanged  
Brakes, Type and Control  Hydraulic Wet Disc  
Operator Station  
Rollover Protective Structure, OOS  ---  
Rigid - Foldable - Telescopic  Foldable, 2-Post  
Platform - Flat/Straddle  Straddle  
Gearshift Location - Console/Floor  Floor, on the side  
Cab  ---  
Doors  ---  
Platform - Flat/Straddle  ---  
dB(A) Rating  ---  
Seat Suspension System  ---  
2WD Dimensions  
Wheelbase, in. (mm)  2050 mm 
   80.7 in. 
Front Tread Range, in. (mm)  ---  
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  3.1 m 
   10.6 ft 
Turning Radius w/o Brakes, ft (m)  2.94 m 
   11.6 ft 
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions  
Wheelbase, in. (mm)  2050 mm 
   80.7 in. 
Front Tread Range, in. (mm)  ---  
Front Axle Clearance, in. (mm)  330 mm 
   13 in. 
Turning Radius w/Brakes, ft (m)  2.94 m 
   11.6 ft 
Turning Radius w/o Brakes, ft (m)  3.63 m 
   14.3 ft 
Limited Slip Differential  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  2450 kg 
   5400 lb 
4WD Dimensions  
Wheelbase, in. (mm)  ---  
Wheel Tread, Min. to Max. in. (mm)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Nebraska Test Unballasted w/Duals, lb (kg)  ---  
Unballasted Weight, lb (kg)  ---  
Standard Tires  
2WD  ---  
Front  7.5 - 16, R1  
Rear  13.6 - 28, R1  
MFWD  ---  
Front  9.5 - 24, R1  
Rear  13.6 - 28, R1  
4WD  ---  
Track widths  ---  
Miscellaneous  
Country of Manufacture  Pune, India  
Ballasting Restrictions, lb (kg)  ---  
*Notes  ---  
 
Don't show this again