John Deere 8370RT

8370RT for sale at Shoppa's Farm Supply. Serving your new and used equipment needs from Bay City, Beaumont, East Bernard, El Campo, Giddings, Liberty, Shiner, and Victoria, TX.

CroppedImage585335-8370RT.jpg

Model: 8370RT

Get a Quote

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Features

  • 370 Engine hp
  • John Deere PowerTech™ 9.0L PSS
  • Choice of e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
  • CommandView™ III cab featuring the Generation 4 CommandCenter™

Specifications

 
Manufacturer John Deere
Model 8370RT (MY2014)
Official Test  
Nebraska Test number  TBD Nebraska Test  
Engine  
Manufacturer  John Deere  
Engine family  9.0L: EJDXL09.0301  
Aspiration  Dual turbochargers, variable geometry turbo with fixed geometry turbo in series  
Cylinders/Displacement, cu. in. (L)  6 cylinders/9.0 L 
   549 cu in. 
Cylinder Liners  Wet  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  758 L 
   200 gal. 
Optional  ---  
Underhood muffler  ---  
Performance  
Advertised PTO hp (kW) @ Rated rpm  At 2100 per SAE: 229 kW 
   308 hp 
Official PTO hp (kW) @ Rated rpm  ---  
@ Standard PTO @ Eng rpm  ---  
Maximum @ Eng rpm  ---  
Advertised Engine hp (kW) @ Rated speed  At 2100 per 97/68EC PS: 272 kW 
   370 hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  ---  
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  ---  
Max Torque Rise (80% rtd spd) @ Eng rpm  ---  
Maximum Torque Rise % (PTO) @ Eng rpm  ---  
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  ---  
Standard PTO Speed @ Eng speed  ---  
Maximum PTO Power @ Eng rpm  ---  
Maximum Engine Power @ Eng rpm  ---  
Max Unballasted Drawbar Power @ Eng rpm  ---  
75% Load, Full Engine rpm (Unballasted)  ---  
75% Load @ Reduced rpm (Unballasted)  ---  
Transmission  
Std. Transmission; Forward/Reverse  IVT  
Opt. Transmission; Forward/Reverse  ---  
Reverser  Left-hand or Right-hand  
On-the-Go Shifting (Yes/No/Partial)  Yes  
Clutch; Wet/Dry  Wet  
Creeper  IVT  
Power Take-Off (PTO)  
Standard  45 mm 
   1.75 in. 
   20 spline, 1000 rpm 
Optional  ---  
PTO Speeds @ Engine rpm  At 2000 rpm: 1000 rpm 
PTO Actuation  Electrohydraulic  
Hydraulics  
Type  Closed-center, pressure/flow compensated  
Pump Rated Output, GPM (L/min.)  ---  
Standard  227.1 L/min 
   60 gpm 
Optional  ---  
Rated Flow @ One SCV, GPM (L/min.)  Rear coupler: 12.7 mm 
   0.5 in. 
   132 L/min 
   35 gpm 
   Rear coupler: 19.1 mm 
   0.75 in. 
   153 L/min 
   40.5 gpm 
Max Output @ SCV Couplers, GPM (L/min.)  ---  
Maximum Operating Pressure, psi (kPa)  20,400 (+ or - 300) kPa 
   2958 psi 
Maximum Hydraulic Power, hp (kW)  ---  
Hitch Draft Control Load Sense Type  Electronic  
Remote Control Valves Available  Standard: four  
   Optional: five or six  
Hitch Category (SAE Designation)  Category 4N/3  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  Category 4N/3: 6803 kg 
   15,000 lb 
Optional  Category 4N/3: 9,702 kg 
   20,000 lb 
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  Electrohydraulic  
Joystick SCV control  Electrohydraulic optional  
Final Drive  
Type  Inboard planetary  
Differential controls  ---  
Availability  ---  
Front  ---  
Front & Rear  ---  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Bar  
Brakes, Type and Control  Hydraulic wet disc  
Operator Station  
Rollover Protective Structure, OOS  ---  
Rigid - Foldable - Telescopic  ---  
Platform - Flat/Straddle  ---  
Gearshift Location - Console/Floor  CommandARM  
Cab  ---  
Doors  left hand  
Platform - Flat/Straddle  Flat  
dB(A) Rating  ---  
Seat Suspension System  Air standard  
2WD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Limited Slip Differential  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
4WD Dimensions  
Wheelbase, in. (mm)  2515 mm 
   99 in. 
Wheel Tread, Min. to Max. in. (mm)  Standard: 1829-3048 mm 
   72-120 in. 
   Optional: 2845-4064 mm 
   112-160 in. 
Turning Radius w/o Brakes, ft (m)  ---  
Nebraska Test Unballasted w/Duals, lb (kg)  ---  
Unballasted Weight, lb (kg)  IVT with: fuel, 113.6 L 
   30 gal. 
   Tracks: 635 mm 
   25 in. 
   No weights: 16578 kg 
   36549 lb 
Standard Tires  
2WD  ---  
Front  ---  
Rear  ---  
MFWD  ---  
Front  ---  
Rear  ---  
4WD  ---  
Track widths  Standard: 635 mm 
   25 in. 
   Optional: 406 mm 
   16 in. 
   457 mm 
   18 in. 
   610 mm 
   24 in. 
   762 mm 
   30 in. 
Miscellaneous  
Country of Manufacture  Waterloo, IA USA  
Ballasting Restrictions, lb (kg)  Refer to operator's manual  
*Notes  ---  
 
Don't show this again