John Deere 8345R

8345R for sale at Shoppa's Farm Supply. Serving your new and used equipment needs from Bay City, Beaumont, East Bernard, El Campo, Giddings, Liberty, Shiner, and Victoria, TX.


Model: 8345R

Get a Quote

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.


  • 345 Engine hp
  • John Deere PowerTech™ 9.0L PSS
  • Choice of 16-speed PowerShift, e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
  • MFWD, or Independent Link Suspension (ILS™)


Manufacturer John Deere
Model 8345R (MY2014)
Official Test  
Nebraska Test number  TBD Nebraska Test  
Manufacturer  John Deere  
Engine family  9.0L: EJDXL09.0301  
Aspiration  Dual turbochargers, variable geometry turbo with fixed geometry turbo in series  
Cylinders/Displacement, cu. in. (L)  6 cylinders/9.0 L 
   549 cu in. 
Cylinder Liners  Wet  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  With G47/48 tires: 645 L 
   170.4 U.S. gal. 
   With G49 tires: 686 L 
   181.2 U.S. gal. 
Optional  ---  
Underhood muffler  ---  
Advertised PTO hp (kW) @ Rated rpm  At 2100 per SAE: 216 kW 
   291 hp 
Official PTO hp (kW) @ Rated rpm  ---  
@ Standard PTO @ Eng rpm  ---  
Maximum @ Eng rpm  ---  
Advertised Engine hp (kW) @ Rated speed  At 2100 per 97/68EC PS: 254 kW 
   345 hp 
Max Unballast Drwbr hp (kW) @ Eng rpm  ---  
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  ---  
Max Torque Rise (80% rtd spd) @ Eng rpm  ---  
Maximum Torque Rise % (PTO) @ Eng rpm  ---  
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  ---  
Standard PTO Speed @ Eng speed  ---  
Maximum PTO Power @ Eng rpm  ---  
Maximum Engine Power @ Eng rpm  ---  
Max Unballasted Drawbar Power @ Eng rpm  ---  
75% Load, Full Engine rpm (Unballasted)  ---  
75% Load @ Reduced rpm (Unballasted)  ---  
Std. Transmission; Forward/Reverse  IVT (42) km 
Opt. Transmission; Forward/Reverse  e23; 23/11 (42 or 50) km/h 
   IVT (50) km/h 
Reverser  Left-hand or Right-hand  
On-the-Go Shifting (Yes/No/Partial)  Yes  
Clutch; Wet/Dry  Wet  
Creeper  IVT  
Power Take-Off (PTO)  
Standard  45 mm 
   1.75 in. 
   20 spline, 1000 rpm 
Optional  45 mm (1.75 in.), 20 spline, 1000 rpm and 1000E economy rpm, in-cab shiftable  
   45 mm (1.75 in.), 20 spline, 1000 rpm, capable of 35 mm (1.375 in.), 6/21 spline, 540/1000 rpm  
PTO Speeds @ Engine rpm  IVT: 1000 PTO rpm @ 2000 engine rpm, 1000 ECO PTO @ 1594 engine rpm, and 540 PTO rpm @ 1814 engine rpm  
   e23: 1000 PTO rpm @ 1995 engine rpm, 1000 ECO PTO @ 1590 engine rpm, and 540 PTO rpm @ 1810 engine rpm  
PTO Actuation  Electrohydraulic  
Type  Closed-center, pressure/flow compensated  
Pump Rated Output, GPM (L/min.)  ---  
Standard  227.1 L/min 
   60 gpm 
Optional  321 L/min 
   85 gpm 
Rated Flow @ One SCV, GPM (L/min.)  Rear: 0.5 in. 
   SCV: 132 L/min 
   35 gpm 
   Rear: 0.75 in. 
   SCV: 153 L/min 
   40.5 gpm 
   Front SCV: 96 L/min 
   25 gpm 
Max Output @ SCV Couplers, GPM (L/min.)  ---  
Maximum Operating Pressure, psi (kPa)  20,400 (+ or - 300) kPa 
   2958 psi 
Maximum Hydraulic Power, hp (kW)  ---  
Hitch Draft Control Load Sense Type  Electronic  
Remote Control Valves Available  Standard: four  
   Optional: five or six  
   2 Front SCV option  
Hitch Category (SAE Designation)  Cat 4N/3  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  Cat 4N/3: 9072 kg 
   20,000 lb 
Optional  Cat 4N/3: 6803 kg 
   15,000 lb 
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  Electrohydraulic  
Joystick SCV control  Electrohydraulic optional  
Final Drive  
Type  Inboard planetary  
Differential controls  Electrohydraulic  
Availability  Yes  
Front  Yes  
Front & Rear  Yes  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  Bar axle, rack and pinion  
Brakes, Type and Control  Hydraulic wet disc  
Operator Station  
Rollover Protective Structure, OOS  ---  
Rigid - Foldable - Telescopic  ---  
Platform - Flat/Straddle  ---  
Gearshift Location - Console/Floor  CommandARM  
Cab  ---  
Doors  left hand  
Platform - Flat/Straddle  Flat  
dB(A) Rating  ---  
Seat Suspension System  Standard: air  
   Optional: active seat  
   Optional: cab suspension with air seat  
2WD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ILS/IVT with 625-kg (1378-lb) inner weights,front weight support, Cat4 hitch with QC, 113.6 L (30 gal.) fuel, 480/80R50 rear duals, 420/85R34 front duals:  
   15,009 kg 
   33,091 lb 
MFWD Dimensions  
Wheelbase, in. (mm)  MFWD: 3080 mm 
   121.3 in. 
   ILS: 3050 mm 
   120.1 in. 
Front Tread Range, in. (mm)  1500 MFWD/ILS: 1524-3657 mm 
   60-144 in. 
Front Axle Clearance, in. (mm)  MFWD: 696 mm 
   27 in. 
   ILS: 590 mm 
   23.2 in. 
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Limited Slip Differential  Hydraulic lock differential  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ILS/IVT with: Inner weights: 625 kg 
   1378 lb 
   front weight support/Cat4 hitch with QC/Fuel 113.6 L 
   30 U.S. gal. 
   480/80R50 duals/420/85R34 front duals  
   14,828 kg 
   32,691 lb 
4WD Dimensions  
Wheelbase, in. (mm)  ---  
Wheel Tread, Min. to Max. in. (mm)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Nebraska Test Unballasted w/Duals, lb (kg)  ---  
Unballasted Weight, lb (kg)  ---  
Standard Tires  
2WD  ---  
Front  ---  
Rear  ---  
MFWD  ---  
Front  420/85R34  
Rear  480/80R50  
4WD  ---  
Track widths  ---  
Country of Manufacture  Waterloo, IA USA  
Ballasting Restrictions, lb (kg)  Refer to operator's manual  
*Notes  ---  
Don't show this again