John Deere 8320R

8320R for sale at Shoppa's Farm Supply. Serving your new and used equipment needs from Bay City, Beaumont, East Bernard, El Campo, Giddings, Liberty, Shiner, and Victoria, TX.

CroppedImage585335-8320R.jpg

Model: 8320R

Get a Quote

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Features

  • 320 Engine hp
  • John Deere PowerTech™ 9.0L PSS
  • Choice of 16-speed PowerShift, e23™ PowerShift, or Infinitely Variable Transmission (IVT™)
  • MFWD, or Independent Link Suspension (ILS™)

 

Specifications

 
Manufacturer John Deere
Model 8320 215 PTO hp
Official Test  
Nebraska Test number  ---  
Engine  
Manufacturer  John Deere  
Engine family  ---  
Aspiration  ---  
Cylinders/Displacement, cu. in. (L)  6 cylinders/8.1 L 
   496 cu in. 
Cylinder Liners  Wet  
Fuel tank capacity, US Gal. (L) (Open; Cab)  ---  
Standard  ---  
Optional  ---  
Underhood muffler  ---  
Performance  
Advertised PTO hp (kW) @ Rated rpm  At 2200 rpm: 160 kW 
   215 hp 
Official PTO hp (kW) @ Rated rpm  --  
@ Standard PTO @ Eng rpm  ---  
Maximum @ Eng rpm  At 1950 rpm: 184.85 kW 
   247.89 hp 
Advertised Engine hp (kW) @ Rated speed  ---  
Max Unballast Drwbr hp (kW) @ Eng rpm  At 1949 rpm: 161.66 kW 
   216.79 hp 
Maximum Torque (PTO) @ rpm, lb-ft (Nm)  At 1300 rpm: 1030 Nm 
   760 lb-ft 
Max Torque Rise (80% rtd spd) @ Eng rpm  At 1801 rpm: 31.0 percent 
Maximum Torque Rise % (PTO) @ Eng rpm  At 1300 rpm: 45.7 percent 
Fuel Use, U.S. gal./hr & hp hr/gal. at:  
PTO @ Rated Eng rpm  ---  
Standard PTO Speed @ Eng speed  ---  
Maximum PTO Power @ Eng rpm  ---  
Maximum Engine Power @ Eng rpm  ---  
Max Unballasted Drawbar Power @ Eng rpm  ---  
75% Load, Full Engine rpm (Unballasted)  ---  
75% Load @ Reduced rpm (Unballasted)  ---  
Transmission  
Std. Transmission; Forward/Reverse  ---  
Opt. Transmission; Forward/Reverse  ---  
Reverser  ---  
On-the-Go Shifting (Yes/No/Partial)  Yes  
Clutch; Wet/Dry  Hydraulic Wet Disk  
Creeper  No  
Power Take-Off (PTO)  
Standard  Independent 1000 rpm 
Optional  540/1000 rpm 
PTO Speeds @ Engine rpm  ---  
PTO Actuation  ---  
Hydraulics  
Type  ---  
Pump Rated Output, GPM (L/min.)  ---  
Standard  ---  
Optional  ---  
Rated Flow @ One SCV, GPM (L/min.)  ---  
Max Output @ SCV Couplers, GPM (L/min.)  ---  
Maximum Operating Pressure, psi (kPa)  20,000 kPa 
   2900 psi 
Maximum Hydraulic Power, hp (kW)  42.3 kW 
   56.8 hp 
Hitch Draft Control Load Sense Type  ---  
Remote Control Valves Available  ---  
Hitch Category (SAE Designation)  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt.  ---  
OECD  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (SAE)  ---  
Standard  ---  
Optional  ---  
Hitch Lift Cap. lb (kg) @24 in. Bhnd Lift Pt. (ASAE)  ---  
Standard  ---  
Optional  ---  
Sensing type  ---  
Joystick SCV control  ---  
Final Drive  
Type  Inboard Planetary  
Differential controls  Electrohydraulic  
Availability  ---  
Front  ---  
Front & Rear  ---  
Engage On-the-Go Rear Differential Lock  Yes  
Axle Type  ---  
Brakes, Type and Control  ---  
Operator Station  
Rollover Protective Structure, OOS  ---  
Rigid - Foldable - Telescopic  ---  
Platform - Flat/Straddle  ---  
Gearshift Location - Console/Floor  ---  
Cab  ---  
Doors  One- Left-hand  
Platform - Flat/Straddle  ---  
dB(A) Rating  72.0 dBA 
Seat Suspension System  Air standard  
   Active seat optional  
2WD Dimensions  
Wheelbase, in. (mm)  ---  
Front Tread Range, in. (mm)  ---  
Rear Tread Range, in. (mm)  ---  
Minimum Rear Tread Setting, in. (mm)  ---  
Front Axle Clearance, in. (mm)  ---  
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  ---  
MFWD Dimensions  
Wheelbase, in. (mm)  2970 mm 
   116.9 in. 
   2490 mm 
   115.7 in. 
Front Tread Range, in. (mm)  1523-2234 mm 
   60-88 in. 
   1516-2230 mm 
Front Axle Clearance, in. (mm)  686 mm 
   27.0 in. 
   585 mm 
   23.0 in. 
Turning Radius w/Brakes, ft (m)  ---  
Turning Radius w/o Brakes, ft (m)  5.6 m 
   18.4 ft 
   5.8 m 
   18.9 ft 
Limited Slip Differential  Standard  
   Hydraulic  
Unballasted Operating Weight, lb (kg)  ---  
Approx. Ship Wgt, lb (kg) Open; Cab  9548 kg 
   21, 050 lb 
   10,183 kg 
   22,450 lb 
4WD Dimensions  
Wheelbase, in. (mm)  ---  
Wheel Tread, Min. to Max. in. (mm)  ---  
Turning Radius w/o Brakes, ft (m)  ---  
Nebraska Test Unballasted w/Duals, lb (kg)  ---  
Unballasted Weight, lb (kg)  ---  
Standard Tires  
2WD  ---  
Front  ---  
Rear  ---  
MFWD  MFWD  
   Independant Link Suspension  
Front  16.9R30  
   None  
Rear  18.4R46  
4WD  ---  
Track widths  ---  
Miscellaneous  
Country of Manufacture  Waterloo, IA U.S.A.  
Ballasting Restrictions, lb (kg)  ---  
*Notes  ---  
 
Don't show this again