John Deere 2032R

2032R for sale at Shoppa's Farm Supply. Serving your new and used equipment needs from Bay City, Beaumont, East Bernard, El Campo, Giddings, Liberty, Shiner, and Victoria, TX.

CroppedImage585335-2032R.jpg

Model: 2032R

Get a Quote

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Features

  • 32 horsepower liquid-cooled diesel engine
  • Drive-over mower decks up to 62 inches
  • Standard 4WD, cruise control, folding ROPS
  • iMatch™ and AutoHitch™ compatible

Specifications

Manufacturer John Deere
Model 2032R (2017)
Engine  
Family  GYDXL1.64NDA  
Manufacturer  Yanmar  
Engine model  3TNV88C-NJT  
Engine power (gross)  23.3 kW 
   31.2 hp 
   SAE J1995 rated power  
Power take-off (PTO) power  18 kW 
   24.2 hp 
Rated engine speed  2500 rpm 
Type  Direct Injection  
Injection pump type  Direct Injection  
Aspiration  Natural  
Emissions compliance  Final Tier 4  
Cylinders/displacement  3 / 1.642 L 
   3 / 100.2 cu in. 
Number of cylinders  Three  
Cylinder liners  Cast-in-block  
Bore and stroke  88x90 mm 
   3.46x3.54 in. 
Compression ratio  19.1:1  
Lubrication  Pressurized  
Cooling system  Water pump  
Air cleaner  Dual element  
Engine torque at rated speed  86 Nm 
   63.4 lb-ft 
Fuel tank capacity  32 L 
   8.5 U.S. gal. 
Electrical  
Battery size  500 CCA 
Alternator (12-V)  85 amp 
Starter size  1.4 kW 
   1.9 hp 
Fuel system  
Type  Direct Injection  
Fuel consumption  ---  
*Fuel consumption rate should be used for comparison purposes only  ---  
Transmission  
Standard transmission; forward/reverse  Hydrostatic transmission (HST)  
Optional transmission; forward/reverse  ---  
Left-hand reverser  ---  
Transmission gear ranges  ---  
Final drive  Bull Gear  
Brakes  Wet disc  
Steering  Power steering  
Clutch, wet/dry  ---  
Clutch disk diameter wet clutch  ---  
Axle capacity  ---  
Front  880 kg 
   1940 lb 
Rear  1089 kg 
   2400 lb 
Creeper  No  
Cruise control  Standard  
Differential lock  Yes  
Drawbar maximum vertical load    
Hydraulics  
Type  Open center  
Pump rated output  35.2 L/min 
   9.3 gpm 
Steering  15 L/min 
   4 gpm 
Implement  20.2 L/min 
   5.3 gpm 
Pump type  Gear  
Maximum operating pressure  172.37 bar 
   2500 psi 
Draft control sensing  Position control  
Remote control valves available  Up to three  
3-point hitch  
Category  Category 1  
Lift capacity, 24-in. behind link arms  615 kg 
   1356 lb 
Power take-off (PTO)  
Standard  Rear - 540 rpm 
   Mid - 2000 rpm 
Optional  ---  
Control  Independent  
Clutch  Independent  
Brake (for mid and rear PTO)  Wet disc  
Engagement method  ---  
Fluid capacities  
Crankcase with filter  4.5 L 
   4.8 qt 
Transmission and hydraulic system  ---  
Final drive  
Type  Spur Gear  
Differential lock  Yes  
Operator station  
Rollover protective structure  ASABE S478  
Type  Foldable  
Platform - flat/straddle  Flat  
Gear shift location - console/floor  Left-hand side  
Cab  
Compliance  ---  
Visibility  ---  
Air conditioning, temperature differential  ---  
Doors  ---  
Noise rating  ---  
Seat equipment  ---  
Dimensions  
Wheelbase  172.5 cm 
   67.9 in. 
Front axle clearance  ---  
Turning radius with brakes  2.75 m 
   9.02 ft 
Turning radius without brakes  3 m 
   9.84 ft 
Limited slip differential  ---  
Approximate shipping weight (open-station; cab)  1105 kg 
   2436 lb 
Tires  
Front  R1 Ag 7.00-12  
   R3 Turf 23x8.50-14  
   R4 Industrial 23x8.50-14  
   R3 Turf Radial 200/60 R15  
Rear  R1 Ag 12.4-16  
   R3 Turf 14-17.5  
   R4 Industrial 14-17.5  
   R3 Turf Radial 300/70 R20  
Front tread range  ---  
Rear tread spacing  ---  
Miscellaneous  
Toolbox  Yes  
Tilt steering wheel  Yes  
12-V Outlet  Yes  
Date collected  ---  
 
Don't show this again