John Deere 2025R

2025R for sale at Shoppa's Farm Supply. Serving your new and used equipment needs from Bay City, Beaumont, East Bernard, El Campo, Giddings, Liberty, Shiner, and Victoria, TX.

CroppedImage585335-2025R.jpg

Model: 2025R

Get a Quote

Fields with asterisks* and highlighted red are required.

Please email our helpful staff with any questions or comments using the contact form.

Send to A Friend

Fields with asterisks* and highlighted red are required.

Your friend will receive an email that contains a reference to this page. Please send this email only to people you know who would be interested in this information.

Features

  • 25 horsepower liquid-cooled diesel engine
  • Drive-over mower decks up to 62 inches
  • Standard 4WD, cruise control, folding ROPS
  • iMatch™ and AutoHitch ™compatible

Specifications

Manufacturer John Deere
Model 2025R (2017)
Engine  
Family  EYDXL1.27NS2  
   FYDXL1.27NS2  
   GYDXL1.27NS2  
Manufacturer  Yanmar  
Engine model  3TNV80F-NDJK  
Engine power (gross)  17.8 kW 
   23.9 hp 
   SAE J1995 rated power  
Power take-off (PTO) power  14.5 kW 
   18 hp 
Rated engine speed  3000 rpm 
Type  Diesel  
Injection pump type  Indirect injection  
Aspiration  Natural  
Emissions compliance  Final Tier 4  
Cylinders/displacement  3 / 1.267 L 
   3 / 77.3 cu in. 
Number of cylinders  Three  
Cylinder liners  Cast-in-block  
Bore and stroke  80 x 84 mm 
   3.15 x 3.31 in. 
Compression ratio  23.1:1  
Lubrication  Pressurized  
Cooling system  Water pump  
Air cleaner  Dual element  
Engine torque at rated speed  54.6 Nm 
   40.27 lb-ft 
Fuel tank capacity  23 L 
   6.1 gal. 
Electrical  
Battery size  500 CCA 
Alternator (12-V)  40 amp 
Starter size  1.2 kW 
   1.6 hp 
Fuel system  
Type  Indirect injection  
Fuel consumption  6.1 L/hr 
   1.6 U.S. gal./hr 
*Fuel consumption rate should be used for comparison purposes only  ---  
Transmission  
Standard transmission; forward/reverse  Hydrostatic - 2 range  
Optional transmission; forward/reverse  ---  
Left-hand reverser  No  
Transmission gear ranges  ---  
Final drive  Bull Gear  
Brakes  Wet disc  
Steering  Power steering  
Clutch, wet/dry  ---  
Clutch disk diameter wet clutch  ---  
Axle capacity  ---  
Front  880 kg 
   1940 lb 
Rear  1100 kg 
   2426 lb 
Creeper  No  
Cruise control  Standard  
Differential lock  Yes  
Drawbar maximum vertical load    
Hydraulics  
Type  Open center  
Pump rated output  21.2 L/min 
   5.6 gpm 
Steering  8.5 L/min 
   2.2 gpm 
Implement  12.7 L/min 
   3.4 gpm 
Pump type  Gear  
Maximum operating pressure  166.9 bar 
   2421 psi 
Draft control sensing  Position control  
Remote control valves available  Two  
3-point hitch  
Category  Category 1  
Lift capacity, 24-in. behind link arms  522 kg 
   1150 lb 
Power take-off (PTO)  
Standard  Rear - 540 rpm 
   Mid - 2100 rpm 
Optional  ---  
Control  Independent  
Clutch  Wet disc  
Brake (for mid and rear PTO)  Wet disc  
Engagement method  ---  
Fluid capacities  
Crankcase with filter  3.2 L 
   3.4 qt 
Transmission and hydraulic system  ---  
Final drive  
Type  Bull Gear  
Differential lock  Yes  
Operator station  
Rollover protective structure  OSHA, SAE, ASAE  
Type  Foldable  
Platform - flat/straddle  Flat  
Gear shift location - console/floor  Left-hand side  
Cab  
Compliance  ---  
Visibility  ---  
Air conditioning, temperature differential  ---  
Doors  ---  
Noise rating  ---  
Seat equipment  ---  
Dimensions  
Wheelbase  160 cm 
   63 in. 
Front axle clearance  318.4 mm 
   12.5 in. 
Turning radius with brakes  2.04 m 
   6.7 ft 
Turning radius without brakes  2.34 m 
   7.7 ft 
Limited slip differential  No  
Approximate shipping weight (open-station; cab)  753 kg 
   1660 lb 
Tires  
Front  Turf - 23x8.50-12  
   R4 - 23x8.50-12  
Rear  Turf - 31x13.5-15  
   R4 - 12-16.5  
Front tread range  95.3 cm 
   37.5 in. 
Rear tread spacing  ---  
Miscellaneous  
Toolbox  No  
Tilt steering wheel  ---  
12-V Outlet  ---  
Date collected  ---  
 
Don't show this again