Search Inventory    Search Products & Site

John Deere Oils

r4d027644 oils Updated 764x302

Up your productivity now and protect your equipment for the long run

Check out our many options here, and be sure to contact us for more information.

558161 Plus 50 II Engine Oil 146x118Plus-50™ II Engine Oil

  • Designed and tested by John Deere engineers.
  • Recommended by engineers who design, develop, and test John Deere engines.
  • Formulated to perform up to 500 hours in your John Deere engine*.
  • Reduces downtime.
  • Next generation low ash CJ-4 formula.
  • Meets performance and emission requirements for all four-stroke diesel engines.
  • Supports engines with diesel particulate filters, including 2007 and newer on-highway vehicles.
  • Backward compatible for all current applications.
  • So good it’s guaranteed (view oil warranty).
  • Available in 15W-40, 10W-30, and full synthetic 0W-40.
  • Increased drain intervals when used with John Deere fluids.
    View Oil Change Calculator.

For more details, view service ratings and features and the Plus-50 II warranty statement.

*See dealer for details

 

r4d003024 torqguard 146x118Torq-Gard™

  • Recommended for all diesel, gasoline, and natural gas (SAE 30 only) engines.
  • Reduces corrosion
  • Controls sludge for a cleaner engine.

 

r4a041683 Plus 4 EngineOil 146x118Plus-4

  • Recommended for autos and trucks with gasoline engines and lawn and garden equipment with four-cycle engines.
  • Provides rapid circulation in cold weather.
  • Cleans the engine as it lubricates for a longer life.

 

nmb breakinplus 146x118Break-In Plus Oil

  • Designed for new, rebuilt, or remanufactured engines.
  • Encourages rings and liners to set correctly to ensure a good wear pattern and longer life.

 

r4a046380 turfgard 146x118Turf-Gard Multi-Viscosity 4-Cycle Motor Oil

  • Recommended for lawn and garden tractors, riding mowers, walk-behind mowers, edgers, generators and other outdoor equipment with four-cycle gasoline engines.
  • Protects all-year long, providing rapid circulation in both hot and cold weather.
  • Keeps engines clean while protecting against wear.

For more details, view service ratings and features.

 

r4a021544 hygard 146x118Hy-Gard™ Hydraulic/Transmission Oil

  • Recommended for equipment with common system reservoirs or separate transmissions, wet clutches, brakes, and hydraulic systems.
  • Saves you money by prolonging your systems.
  • Viscosity between ISO grades of 46 and 68 at 40 degrees C.
  • Works well in all temperatures.

For more details, view service ratings and features.

 

r4a046383 Bio Hy Gard Only 146x118Bio Hy-Gard™ II

  • Biodegradable and eco-friendly.
  • Made with canola.
  • 100 percent compatible with petroleum oils.
  • Will not harm grass or soil if it’s leaked or spilled.

 

r4a027133 low hygard 146x118Low-Viscosity Hy-Gard™

  • Perfect for cold-region use.
  • A direct replacement for all-weather hydrostatic oil.

 

r4d060471 rrd hydrau comp 146x118Hydrau™

  • Approved for use in hydraulic and hydrostatic systems of construction and forestry equipment.
  • All-season capability in ambient temperatures of -25°C (-13°F) to +50°C (+122°F).
  • Factory fill fluid.
  • Exceptional anti-wear performance over the life of the fluid.
  • Protects against rust and corrosion.
  • For more details, view Hydrau spec sheet

 

r4d060471 rrd hydrau xr 146x118Hydrau™ XR

  • Approved for use in hydraulic and hydrostatic systems of construction and forestry equipment.
  • All-season capability in ambient temperatures of -40°C (-40°F) to +40°C (+104°F).
  • Exceptional anti-wear performance over the life of the fluid.
  • Protects against rust and corrosion.
  • For more details, view Hydrau XR spec sheet

APPLY FOR FINANCING TODAY!